Chloramine (NH2Cl) is commonly used in low concentrations as a disinfectant in municipal water systems (your tap water) as an alternative to chlorination. This application is increasing in use.
Chloramine
Chloramine is a combination of chlorine and ammonia. It is a stronger disinfectant than chlorine alone and is used in areas where this extra disinfectant is needed.
Chloramine (1-CH3C6H4-4-SO2NClNa:3H20) - Chloramine is a disinfectant added to water for public health protection in some areas.
Chloramines-treated water: There were also a very few cases where chloramines-treated water seemed to interfere with the young colonies at the final large water change before adding fish.
Chloramine: Municipal water treatment and storage facilities use chloramine to treat water. It is easily removed with many commercially available additives. It is toxic to aquatic animals.
Chloramine: This substance is sometimes used as a bactericide in municipal water supplies. It it poisonous to fish, but can be removed with many commercially available dechlorinating additives.
Chloramine - Combination of Chlorine and Ammonia that is frequently added to municipal water supplies to maintain municipal water quality standards. Also prevents the establishment of Biofilm in municipal water supply lines and storage containers.
chloramine
Sometimes present in tapwater, where it's added to kill bacteria. Supposedly harmless to humans, but is poisonous to fish and kills good bacteria. Chloramine won't evaporate from water, but chlorine removers will get rid of it.
Chloramine
, chloramin in water
Chloramine is produced when a water treatment plant injects both chlorine and ammonia
simultaneously into the water supply.
Chloramine in Water
Water company adding chloramine as a substitute for chlorine.
Fish dart about. gills pump furiously.
Chloramine poses two significant headaches for aquarists. First, chlorine-neutralizing chemicals such as sodium thiosulfate only neutralize the chlorine portion of the chloramine, neglecting an even bigger problem: deadly ammonia.
Chloramine is not so readily removed by aging, and is more complicated to remove with commercial dechlorinating products since one must also remove the ammonia. These issues have been dealt with in detail in a previous article.
Chloramines are not highly disassociated in aquatic solutions (in other words, only minimally ionic). That fact, and their low molecular weight, makes them difficult to remove via RO (discussed in more detail below).
If chloramine is in your water supply, letting the water sit out will not do. You need to take steps to remove it. Check the back of the bottle of dechlorinator or water conditioner to see if it removes chloramine or not.
Chlorine, Chloramine, Fluorine compounds et al. are hemolytic in their action, splitting up blood cells. Additionally, in sufficient concentration, the actual gill membranes will dissolve in their presence.
Chlorine and Chloramine are added to water to eliminate harmful bacteria in drinking water for human consumption, but are very toxic to fish, beneficial bacteria and plants.
Chloramine - A chemical sometimes used by municipal water treatment facilities in
place of chlorine since it is more stable in water and will not evaporate. This is very ...
Be sure to get a water conditioner that removes chlorine AND chloramines, and use it in all water you add to tank. My choice for a newbie tank would be a 29 gal, with whisper 2, strip light and glass cover, two small heaters.
If you have a municipal (city) water supply, it will have chlorine or chloramine that has to be neutralized . It will also likely contain toxic metals. These problems can be solved simply by using products made for starting aquariums.
Chloramine
Chloramine is a germicidal compound used by some water companies to make processed water "potable" for human usage. It is obtained by bubbling chlorine gas through ammonia pellets.
Since, tap water is laced with chlorine and chloramines you want to have water treatments on hand. Fish, unlike people cannot live as long while drinking chlorine/chloramines based waters.
Municipal water contains such added chemicals as chlorine or chloramine to make it safe for human consumption. These substances are toxic to fish and can weaken, damage or even kill fish. (See the WATER TREATMENT section of this FAQ for details.) ...
It does need to be chemically treated to remove chlorine and or chloramines that are added by the water company. There are many brands and they all do about as well.
Just like you needed to condition the water before putting it in the tank in the first place, you'll need to watch the chlorine and chloramines levels before adding new water to the tank on a routine basis.
Before adding new water to the aquarium, you will need to treat it to neutralize any chlorine or chloramine in the water so that it will not harm your fish or your biological filter.
Chlorine/Chloramine can damage the fish , and there are a lot of "tap water conditioners" on the market, so buy one NOW!! ...
Many new hobbyists assume that adding a chlorine or chloramine remover to a newly set up aquarium is all the "conditioning" required.
Depending on what part of the nation you live in, your source water may contain varying levels of chloramine, nitrate, phosphate, silicate, and other algal nutrients. Test your source water to see if these chemical nutrients are present.
"Aquasafe will neutralize chloramine by breaking down the bond between chlorine and ammonia while reducing both the fish-toxic chlorine and ammonia components." Very important like I mentioned above! An important note on the back of this bottle...
Start Right Tank Buddies are quick dissolving, easy-to-use tablets that remove chlorine, chloramine and heavy metals from your aquarium. These fast acting tablets work almost immediately to condition the water and make it safe for your fish.
Since municipal water supplies are treated with chlorine and/or chloramine, these substances must be neutralized before the water is added to an aquarium.
Tap water typically contains chlorine and chloramine, which will kill your fish. Although these will have an immediate effect on your fish, there are usually other contaminates in tap water which need time to affect the tank.
Prime™ removes chlorine, chloramine and ammonia. Prime™ converts ammonia into a safe, non-toxic form that is readily removed by the tank's biofilter. Prime™ may be used during tank cycling to alleviate ammonia/nitrite toxicity.
Don't forget to add a water conditioner that removes chlorine and/or chloramines if you are using tap water. These can kill fish and even plants if not removed.
Designed to work together, these two will neutralize ammonia, chloramine, chlorine and heavy metals. Novaqua adds beneficial compounds to the water that aid in slime creation and help heal tattered fish.
If it contains chlorine (chloramine will also put chloride into the water), ...
Ammonia absorbers, such as Ammogon tm help prevent problems when water aging is done chemically (treatment with chloramines releases free ammonia). Other "chemical" filtration includes ion exchangers which reduce either carbonate or sulphur hardness.
For freshwater aquaria, additives formulated to remove chlorine or chloramine (used to disinfect drinking water supplies for human consumption) are often all that is needed to make the water ready for aquarium use.
If you plan to use the old filter in the new tank, leave it running on the small tank. Run an air stone in the new tank if you have one. That will help drive off any chloramines that may be in your water supply.
Our tap water (in the UK), is usually perfectly adequate for fish-keeping as long as a suitable water-conditioner is used to neutralise chlorine and chloramines and reduce the effects of heavy metals.
Large buckets, plastic garbage bins, a few extra powerheads or even the bathtub will all come in handy. You need to be able to treat large volumes of water either to remove chlorines and chloramines or to convert it into marine water if you are ...
 See also: Water, Fish, Aquarium, Chlorine, Filter
  
|
RSS
