Resins: Synthetic media used for chemical filtration through a process known as ion-exchange.
Resource: A commodity that is required by an organism and is potentially in short supply.
Resins are less utilized than carbon, but are becoming more common. These work by attracting a specific molecule to adhere to them. Some attract ammonia or nitrate, and some remove dissolved organics.
Exchange Resins:
Nitrogen: The commonest material used for this purpose is a mineral, zeolite. This material exchanges salt ions for nitrogenous ions in solution. There are also synthetic resins with similar action.
Both natural zeolites (which look like little chips of cement) and synthetic resins (which look like little plastic beads or chips) are used to remove ammonia from aquarium water.
Examples are protein skimmers and any filter containing chemical media such as activated carbon, molecular adsorption pads, or resins. chiller A device which makes aquarium water cooler.
I plan on using the > deionzer chambers from Cole-Parmer ($75 each) plus anion and cation resins > from Spectrapure ($85 and $41/gal respectively).
Chemical filtration is provided by carbon or chemical resins that extract toxins from the water. Activated filter carbon will aggressively remove chemicals from your water until the carbon becomes saturated.
Certain chemicals, membranes, ion exchange resins, and other materials are sensitive to specific pH conditions. An example of this is to prevent acid corrosion in boiler feed water by adjusting the pH so it is in between 8.3 to 9.0.
Dispersants.
Fluidised beds are sometimes used with ion exchange resins, types of lime and activated carbon as they have the advantage that solids particles can pass through them, whereas they would get caught up in a static bed.
Iron-based phosphate removing resins have increased in popularity within the hobby over the last few years for good reason. These compounds are very good at pulling phosphate as well as heavy metals from the water in a relatively short time.
CHEMICAL FILTERS (advanced) Ion exchange resins are used to deionize new water. Also, synthetic resins designed to adsorb specific ions (like phosphates, or nitrates, or sulphates) are now available.
The chemicals in your freshwater aquarium need to be kept in balance, so zeolites are used to remove ammonia, and water hardness is reduced by ion exchange resins.
It is generally acknowledged that there are three forms of filtration: biological, in which ammonia and nitrite of fish waste is broken down by bacteria, chemical, in which carbon or resins are used to adsorb dissolved waste, ...
This stuff includes resins, carbon, or inert substances. Most of the time you will find these in another filter, however these can be stand alone. For instance, bio-balls in a sump offer biological filtration.
The more advanced version of ion exchange consists of two resins, one anionic (as described above) and the other cationic. Both work by exchanging ions, therefore the name deionizing unit (DI).
Polyester padding and activated carbon are universally available, and common options include zeolite for ammonia removal, resins for phosphorous removal, ceramic for biofiltration surface area, ...
Any outbreak of fin rot should be treated initially by improving the water conditions, with water changes and by any other appropriate means such as conditioners, resins, and ammonia removers, well before treatment. Check that the tank is warm enough.
Chemicals are removed from your water with activated carbon or ion-exchanging resins in your filter.
This is achieved through the use of various media or resins placed in the filter. These media removes dissolved waste materials such as fish waste, etc. that can cause odors and discoloration of the aquarium water.
Instead of spending on RO or other resins, you can spend that money on a bigger tank. Try to keep your pH fairly stable. If you are so concerned about your fish's health, consider regular water changes.
These, coupled with de-ionizing resins, produce water which is 98% pure. If the price of a RO/DI combination is too much, then you can always use distilled water (not spring water).
4) Engage filtrants (carbons, zeolites, appropriate resins) to remove the source of the problem.
5) Flush the whole mess and start over again. Oh sorry, just kidding.Other Sources of These Noxious Chemicals: ...
By similar logic, any other ammonia removing chemicals (eg. Ammo-lock) or resins (Amrid) should also be avoided while cycling... they will affect the cycle, extending it's duration or otherwise adversely affecting the bacterial colonies.
The carbonates may be removed by the ion exchange resins mentioned above (traded for Cl-, chloride). Chlorides have no influence as buffers. Carbonates are also removed or reduced by RO or DI.
Deionizer: A device for filtering water that uses several ion exchange resins to purify and remove impurities from the water.
Ion exchange resins also can be used to lower the water hardness. Boiling water for a period of time can also reduce its hardness. To harden the water, filter the water through dolomite or crushed coral until the desired hardness is reached.
Second is chemical filtration, removal of additional toxins and chemicals such as ammonia by absorbing them in carbon or resins.
They utilize a patented technology of conductive particles and thermo-sensitive organic resins to allow heat resistance to increase along with temperature-assuring that the unit cannot overheat even when out of water.
Chemical filtration is achieved by using activated carbon or other resins to chemically remove certain compounds from the water. This discussion is going to cover the third type of filtration, Biological.
tap water to remove phosphates was the obvious solution, but many of these methods were expensive for the average hobbyist ten or fifteen years ago. Reverse osmosis systems cost as much then as a complete filtration system. Phosphate removal resins ...
 See also: Water, Fish, Aquarium, Filter, Filtration
|
