Altimeter setting
Tags: FAA Pilot's Handbook, Instruments
Altimeter setting. - Station pressure (the barometric pressure at the location the reading is taken) which has been corrected for the height of the station above sea level.
altimeter setting
The barometric pressure reading used to adjust a pressure altimeter for variations in existing atmospheric pressure or to the standard altimeter setting (29.92 inches of Hg) ...
Altimeter Setting - A reference setting on the altimeter so that the instrument indicates an accurate altitude.
Axial - Motion along a real or imaginary straight line on which an object supposedly or actually rotates.
ALTIMETER SETTING A value related to local barometric pressure, usually provided to pilots by ATC. Used as a reference setting so that the aircraft altimeter indicates an accurate altitude.
Altimeter setting. Station pressure (the barometric pressure at the location the reading is taken) which has been corrected for the height of the station above sea level.
AME. See aviation medical examiner.
Altimeter Setting:
Any altimeter setting more than five miles from the ARP affects the landing minimums. No remote setting can be used beyond 75-miles or different than 6000 feet.
The altimeter setting is arranged so that right at the reporting station, calibrated altitude agrees exactly with the station elevation.
QFE: altimeter setting to read zero at airfield level.
QNH: altimeter setting to indicate height amsl.
RCC: Rescue Co-ordination Centre.
Weather Data
Altimeter setting ________ hPa/in.Hg
Surface wind _______ at _______ Kts
Temperature ________ C _______ F ...
Example 1: With altimeter setting indicator at 29.92 inches, the altimeter reads 9,500 feet. Outside air temperature is -8 degrees C.
The Automated Surface Observation System provides continuous observations, and measures and reports altimeter settings, wind speed and direction, gusts, temperature, dew point, visibility information, cloud and ceiling data, variable cloud height, ...
Altimeter Setting - Barometric pressure reading used to adjust the altimeter
Apron - Area of an airport used for loading/unloading, servicing, refueling, and parking of aircraft
AAS - Airport Advisory Service ...
The altimeter setting is 29.87 inches of mercury (however this could also be expressed in millibars or hectopascals.) Visual and simultaneous ILS landings available using Instrument Flight Rules, using runways 26L and 26R, ...
When set to a QNH altimeter setting, will indicate altitude;
b. When set to a QFE altimeter setting, will indicate height above the QFE reference datum; and
c. When set to a pressure of 1013.2 hPa (1013.2 mb), may be used to indicate flight levels.
Hectopascal (hPa) - unit of pressure measurement, equivalent to one millibar (which see), now the ICAO standard for altimeter setting.
HEMS - helicopter emergency medical services.
This service consists of providing information to landing and departing aircraft concerning wind direction and velocity, favored runway, altimeter setting, pertinent known traffic, pertinent known field conditions, ...
Greetings David:
There are several solutions to this problem. I met one fellow who claimed the only way he could hold altitude in a steep turn was by continually updating the altimeter setting. This isn't a good solution. I have a better one.
Altimeter setting: barometric pressure reading in millibars (for example: 1015), or inches of mercury (for example: 29.80) used to set a pressure altimeter's sub-scale to QFE or QNH.
APP: Approach control
APU: Auxiliary Power Unit.
 See also: Altimeter, Aircraft, Pilot, Aviation, Flight
  
|
RSS
