Together they comprise the Golden Triangle of America's "Renaissance City," so-called for its rebirth from what was the dingy steel city of smoke and soot not many years ago, ...
STEEL
The next material to be considered for aircraft structure will thus be steel, which has the same weight-to-strength ratio of wood or aluminum.
Steel
Steel components (such as fuselages, fittings and bolts) easily can be designed to have an infinite fatigue life because one of steel's characteristics is that as long as the loads are kept within design limits (under its S-N curve), ...
Steel Tube Frame: No Cracks
Just like other places on the aircraft, we want to check where the frames are welded to make sure there are no cracks.
Engine Sheet Metal: No Cracks ...
Steel: A high-grade iron alloy with a content of carbon and sometimes with other elements added, such as nickel. Stainless steel has a high chromium content and is non-corrosive.
A solid steel wire used to support the structure of an airplane's wings or fuselage. Turnbuckles are often used to tension the wires. In the early days of aircraft design the biplane with bracing wires and struts was the strongest design.
Aluminum Vs. Steel Antenna Mast
Antenna masts can be made from steel or aluminum, depending on the required load-bearing capacity of the mast. Steel is structurally the stronger of the two metals, so it is typically used for...
RC Helicopter Tricks ...
-The steel struts on the controls to which the control wires are attached.
22. Struts; Wing Struts.
Detail: Load Bearing MountThe weight and torque of the engine are conveyed to the craft's stringer through a transverse steel weldment bolted to the stringers.
The Chrome-Moly SAE 4130 steel tube fuselage was retained in the cabin area while the entire empannage was redesigned as an aluminum monocoque structure.
It had a Warren girder-type fuselage of high-tensile steel tubes, over which sat frames and longerons that carried the doped linen fabric covering.
aircraft compass is not in alignment with the magnetic North of the master compass, correct the error by making small adjustments to the North-South brass adjustment screw with a nonmetallic screw driver (made out of brass stock, or stainless steel ...
On 15 June 1944, 47 B-29s launched from Chengdu, China, bombed the Imperial Iron and Steel Works at Yawata Japan. This was the first attack on Japanese islands since the Doolittle Raid in April 1942.
Metal Propellers: During 1940, solid steel propellers were made for military use. Modern propellers are fabricated from high-strength , heat-treated, aluminium alloy by forging a single bar of aluminium alloy to the required shape.
Fireproof: (1) With respect to materials and parts used to confine fire in a designated fire zone, means the capacity to withstand at least as well as steel in dimensions appropriate for the purpose for which they are used, ...
Turning the handle forward caused only the steel cable to slip on the trim pulley without any effect on the trim control. At that point my right hand started to give in to the pressure.
The steel tabular engine mounted in the Super Cub models is mounted to fuselage at the firewall on hinges, so that the rear of the engine can readily be made accessible for service. The propeller is the Sensenich metal design 74-DM-56.
The most commonly used pickets are the coiled type (helix) and the crossover tubes with steel stakes. Carry at least six stakes, three crossover tubes and enough rope in a bag with a hammer (think weight and balance here).
BOWDEN CABLE - A bowden cable is a type of flexible cable used to transmit mechanical force or energy by the movement of an inner cable (most commonly of steel or stainless steel) relative to a hollow outer cable housing.
The nosewheel eliminates the need for fussy oleo struts by using a steel tube attached to high-resistance bungee cords under the cowling. The cords provide the necessary give and are easy and inexpensive to replace.
BRACING WIRE
A solid steel wire used to support the structure of an airplane`s wings or fuselage.
BRAKE HORSEPOWER
means the power delivered at the propeller shaft (main drive or main output) of an aircraft engine ...
The main principle of Zeppelin's invention was that hydrogen-filled gas-bags were carried inside a steel skeleton.
wide, mounted in two halves at a very slight dihedral angle, on top of a steel tube with conical ends which contained the compressed air. This reservoir was 4 3/4 in. in diameter and 33 1/2 in.
The Box Truss design is made up of wooden planks or steel or aluminum tubes that are welded into an array of triangles, much like a bridge or crane tower. This design is popular because it is strong, easy to assemble, and very inexpensive to build.
Boots - Inflatable device on leading edge of wings and tail. Used to remove ice.
Bracing wire - A solid steel wire used to support the structure of an airplane's wings or fuselage.
BRG - Bearing.
BSU - Beam steering unit.
Marston Matting: Perforated steel planks laid to create a temporary air field.
Mary: Allied code for Kawasaki Ki.32, IJAAF Light Bomber
MASAF: Mediterranean Allied Strategic Air Force
MATAF: Mediterranean Allied Tactical Air Force ...
 See also: Aircraft, Flight, Plane, Power, Pilot
|
