Home (Throat)
Home  
 
 
Home » Boating » Throat


 

Throat

Boating TholeThrough hull

Throat halyard
From Wikipedia, the free encyclopedia
Jump to: navigation, search ...

 


throat - The forward upper corner of a four cornered sail known as a haff rigged sail.
thwart - A seat running across the width a small boat.
thwartships - Also athwartships. Across the width of a boat.

throat - The deepest part of the hollow of the jaws of a gaff, or the hollow of a V shaped knee, or the hollow of a floor. The throat halyards are those which are attached to the throat of a gaff.

throat
In a gaff rig, the forward end of the gaff, usually in the shape of jaws that slide up and down the mast. The throat halyard raises and lowers the throat.
throttle ...

BALANCE REEF - A diagonal reef in a fore-and-aft sail extending from throat to clews.
BALE - A fitting on the end of a spar, such as the boom, to which a line may be led.
BALLAST WEIGHT - usually metal, placed low in a boat to provide stability.

that can be decoded into any language in the wind Pointing a boat too high into the wind, resulting in some of the wind being spilled from the sails [Top of Page] [Bottom of Page] jam cleat A fitting designed with a V-shaped throat ...

' throat and end-seizing made on one end, and the end of ano1!her hawser rove through the bight, and hitched with another throat and end-seizing.
Temporary Bend W1. I, fig. 2).

Cast off the tyers from the mainsail; hook on the peak halyards; see that the gaff goes up between the topping-lifts as you hoist up on the throat and peak halyards; hoist up on the throat until the luff-rope is straight; ...

This fork is called the throat of a gaff. Sails are hoisted using ropes, which are called halliards. The gaff sail is set with a peak halliard (the zigzag line between the gaff and the mast on the left stamp) and a throat halliard.

If so, they are relatively simple to put right by appropriately adjusting the throat, head, tack or clew. You may be wondering why it matters - a few creases aren't that important, surely? Unfortunately they are.

On marine carburetors, these vents lead into the carburetor throat so that the engine consumes any overflow. Marine fuel pumps are sealed to eliminate external leaks.

I, bowsprit and martingale; 2, jib - behind it is the foresail; 3, cross-trees and topmastshroud; 4, pennant designating the club to which she belongs; 5, gaff-topsail; 6, peak of gaff, hoisted by peak and throat halyards; 7, mainsail; 8, ...

Or say I am a couple of hours from home when the wind drops and I need to motorsail, I like to keep it under 1,800 rpm so we can talk over the engine (and to feel like I am still sailing.) I kind of like the soft, throaty purr of my diesel motoring ...

Similar to a gaff sail, but with a wider throat.
Lugger - A sailing vessel rigged with lugsails.
Lugs - Metal or plastic pieces attached to a sail's luff that slide in a mast track to allow easy hoisting of the sail.

See also: Sailing, Sail, Gaff, Boat, Mast