Brick veneer

Brick Veneer Construction
Brick Veneer Construction
What is brick veneer? It is just as it sounds the brick facade is anchored to the timber frame of the house with metal brick ties.

Brick veneers range from 1/2 inch to 4 inches thick. Veneers of full-thickness brick are applied to the wall with mortar; this requires careful planning and is not considered a do-it-yourself project.

Brick veneer is a good surface-covering option as it creates the illusion of brick without requiring all the complicated work involved in laying actual brick. Many people enjoy this type of veneer because of its inviting, traditional appeal.

Stone and Brick Veneer
At a fraction of the weight and cost of full-sized stone and brick, veneer gives remodelers a host of creative design options.
Page 1 of 2 ( 1 2 ) ...

Brick Veneer Garage (04-002-295)
Sq. Ft.
2 car garage w/brick veneer on all sides. Standard 8' ceiling, double overhead door.

Brick veneer " A vertical facing of brick used to clad a building. Brick veneer is not a load-bearing component. Read More...

Brick veneer is a facing of brick used as the outer surface of a framed wall.
Bridging are small wood or metal pieces placed diagonally between floor joists.
Building paper is heavy paper used in walls or roofs to absorb dampness.

BRICK VENEER - A brick facing applied to wood-framed house. It is attached to sheathing of framed walls with metal ties.

BRICK VENEER Framed construction with an outside skin of brickwork tied to the frame.

Brick veneer. A facing of brick laid against and fastened to sheathing of a frame wall or tile wall construction.

Brick veneer - A non-loadbearing facing of brickwork laid outside, and tied to, a loadbearing timber or metal framed structure.

Brick Veneer - A vertical facing of brick laid against and fastened to sheathing of a framed wall or tile wall construction.

brick veneer (construction à placage de brique, f.) A facing of brick tied to a wood frame, concrete or masonry wall, serving as a wall covering only and carrying no structural loads.

Brick Veneer: A non-load bearing single tier of brick applied as the facing to a wall of other materials.
Bridging: Cross members inserted between joists to hold the joists in position.

Brick veneer:
brick used for outer surface of a framed wall.

Bridging:
metal or wood placed diagonally between joists to prevent joists from twisting.

Brick Veneer
Non-loadbearing brick facing applied to a wall to give appearance of solid-brick construction; bricks are fastened to backup structure with metal ties embedded in mortar joints.
Bridging ...

BRICK VENEER: brick facing over wood or masonry frame.

BRIDGING: bracing between floor joists to prevent twisting of joists.

Brick Veneer
Brick used as the outer surface of a framed wall.
Bridging ...

Brick Veneer: A facing of brick tied to a wood frame or masonry wall, serving as a wall covering only and carrying no structural loads.
Return to top
C ...

Brick Veneer
Water penetration through the brick veneer
Improper flashing and counter-flashing installation ...

Brick veneer Walls that consist of a single non-structural external layer of masonry work, typically brick, backed by an air space. The innermost element is usually structural, and may consist of wood or metal framing or masonry.

Brick veneer tile
Tile that simulates the appearance of real brick.
Bright Rubbed Effect ...

Brick Ledge That portion along the exterior of a slab on a grade foundation which is reserved for and supports the brick veneer.

Brick veneer construction (Brick veneer)
A method of construction for external walls, consisting of a single, non-load bearing external skin of brickwork , tied to a load bearing timber or metal framed structure.

Check excessive mortar has not accumulated in the void between the exterior wall sheathing and the brick veneer.
Check for weep holes every 33 inches including over all doors and windows with metal lintels. Minimum width- 3/16-inch.

Brick veneer ties can also be made of a stranded wire that should be at least a number 6 U.S. gauge wire, which is embedded in the mortar joint of the wall. Many houses have brick veneer that has been improperly tied to the building framing.

In summer months, the air space behind the brick veneer will typically contain air that is hot and humid relative to the interior. This air can achieve a relatively high vapor pressure relative to the interior.

One is brick veneer, which is a thin brick set to the outside of a wooden stud wall. The brick is not actually the supporting wall.

Wall Tie: A small metal strip or steel wire used to bind tiers of masonry in cavity-wall construction, or to bind brick veneer to the wood-frame wall in veneer construction.

In a brick veneer house like this one, there will be a space between the brick and the wood framing. To fill that gap, I’ll first caulk around the window flange, and then install a piece of 2 X 4, which I’ve cut to fit.

Brick Veneer Wall: A facing of brick commonly used in modern construction that covers an exterior load bearing wall.

Moisture Issues in Homes with Brick Veneer (PDF 860 KB). (August 2003). Integrated Building and Construction Solutions.
Skip footer navigation to end of page.

Determine length of deck, cut and nail ledger board directly to sheathing or brick veneer. Drill 1/2" holes every 16" through ledger board and house floor joists. Install with 1/2" x 8" galvanized nuts and bolts with washers and tighten securely.

METAL WALL TIES: Strips of corrugated metal used to tie a brick veneer wall to framework.
MILLWORK: Finish carpentry work or that woodwork done in a mill and delivered to the site; relates to interior trim.

BRICK TIE: Metal anchors installed to secure brick veneer to the exterior wall.
BRIDGING: Cross bracing or solid blocking between joists to stiffen floor framing.

QUOIN: A large, square stone or brick veneer set into the corners of masonry buildings for architectural style.
R
RABBET: Groove cut along the edge or end of a board to receive another board.

Cedar gives long service with little maintenance in applications such as mud sills, window sashes, sheathing under stucco or brick veneer construction, greenhouse benches, fencing, poles, trellises, and exterior shutters.

Angle Iron
A piece of iron that forms a right angle and is used to span openings and support masonry at the openings. In brick veneer, they are used to secure the veneer to the foundation. Also known as shelf angle.

Frequently used framed exterior walls appear to be of brick construction. In this situation, the brick is only one course thick and is called a brick veneer. It supports nothing but itself and is kept from toppling by ties connected to the frame wall.

In addition, the newest installations are designed with a drainage system behind the insulation to allow any water which does get in, to drain out. This is not unlike the drainage system found in a brick veneer home.

Use of such materials can reduce heating and cooling energy requirements by nearly 25% as compared with mere brick veneer houses. Consult the energy labels on appliances before choosing them.

See also: Brick, Veneer, Building, Construction, Home