Drip

Drip Cap Flashing
Make sure to always install a drip cap flashing over the head casing of all doors and windows. A flashing will prevent water from penetrating the door or window frame.
Add To: Del.icio.us Digg Google Y! MyWeb Reddit Technorati ...

Drip Irrigation
This is a type of irrigation system which is installed directly near the roots of all garden plants. The irrigation will slowly release water to the roots of the plants in small doses.

The drip that drives you crazy: A trickle from a single-lever kitchen faucet is a sign of a worn valve-stem assembly. Before starting repairs, turn off both water-supply lines.

The drip edge has been installed on the lower edge and the rake (the sloped edge).
We nailed a strip of aluminum flashing in the valley. We used 6 inch wide metal here, but 10 or 14 inch would have been better.

Drip Irrigation
The "drip" method is not preferred for lawn irrigation. It is much better suited for flowerbeds and the like. Basically, a drip system is a long hose dotted with holes where water can escape.

Drip - (a) A member of a cornice or other horizontal exterior finish course that has a projection beyond the other parts for throwing off water.

Drip edge: A narrow preformed piece of sheet metal placed along the edge of a roof line so it overhangs the edge of the roof and allows water to be carried beyond the roof edge and drip directly to the ground.

Drip Irrigation
With spring right around the corner and water conservation as important as ever, now might be a good time to think about installing drip irrigation.
» Read More...

DRIP EDGE: A piece of metal placed over the roof sheathing at the perimeter to deflect water away from the sheathing and fascia board.
EAVE: The lower part of a roof where it meets or projects over a wall.

Drip edge: A non-corrosive, non-staining material used along the eaves and rakes to allow water run-off to drip clear of underlying construction.

Drip Cap: a molding placed on the top of the head brick mould or casing of a window frame
Egress Window: a window providing an alternative exit route in case of emergency ...

Drip
A projecting piece of material shaped to throw off water, prevent it from running down a wall or running back under a projection.

Drip:
A recess cut under a sill or projecting stone to throw off water, preventing it from running down the face of the wall or other surface, such as a window or door.
Dry Wall: ...

Drip "A groove in the underside of a sill or drip cap to cause water to drop off on the outer edge instead of drawing back and running down the face of the building.

drip (larmier, m.) A construction member, wood or metal, which projects to throw off rain water. A groove on the underside of a projecting part, such as a sill, serving the purpose.
drip leg See plumbing terms: relief pipe.

Drip edge: An L-shaped strip (usually metal) installed along roof edges to allow water run off to drip clear of the deck, eaves and siding.
Eave: The horizontal lower edge of a sloped roof.

Drip: A groove or slot cut beneath and slightly behind the forward edge of a projecting unit or element, such as a sill, lintel or coping, to cause rainwater to drip off and prevent it from penetrating the wall.

DRIP: Projecting construction or groove below an exterior member to throw off rainwater.
DRY ROT: A term applied to many types of decay, especially and advanced stage when the wood can be easily crushed to a dry powder.

DRIP EDGE: A piece of metal placed over the building or home's roof sheathing at the perimeter to deflect water away from the sheathing and fascia board.

Drip cap-A separate piece of wood projecting over the top of the window; a component of the window casing. The drip cap protects against moisture.
Window trough-The cut or groove in which the sash of the window slides or rests.

Non-drip (paint) - A Thixotropic paint which has gel like consistency and so tends not to run or drip.

Does it drip... look really ugly? No... I mean the faucet!
Faucet installation is not what it used to be... thank goodness! The do-it-yourself revolution has made faucet installation easier than ever.

Install Drip Irrigation for Your Vegetable Garden
Keeping your vegetable garden hydrating is important to the success of your harvest.

Drip edges are corner-shaped metal strips that nail along the edges of the roof. They allow water from the roof to run cleanly off the edge.

Drip
Interruption or offset in an exterior horizontal surface, such as a soffit, immediately adjacent to the fascia. Designed to prevent the migration of water back along the surface.
Drywall ...

Drip Cap
A piece of trim used to deflect water away from the top of vertical siding, to prevent water from getting in behind the siding. In some instances a drip cap may be used over windows and doors to deflect water run-off.
F-Channel ...

Drip irrigation systems are great for flower beds, small bushes, and small trees.

Drip groove - A groove cut in the underside of a projection (such as a window sash or sill) to cause rainwater to drip to the ground rather than running under the projection onto the main structure.

Drip systems are also cost effective. They cost about 1 1/2 times as much as a sprinkler system if you are starting from bare ground, but you will make the money back on savings.

Drip edge
Is it necessary to install drip edge on a complete reroof?
Typically YES, because the drip edge covers the aluminum fascia and prevents water from seeping down behind the fascia and maybe into your house.

Drip
The strip of metal extending out beyond the eaves or rakes to prevent rainwater from rolling around the shingles back onto the wooden portion of the house.
Eaves ...

Drip edge - a metal flashing installed at the low point of roof slope where water runs off, typically consisting of 2 sides, the nailer flange and the exposed face.
Drying-In - The application of roofing felt to the roof deck.

DRIP EDGE: material designed to force water to drip away from roof rakes and eaves.

DUCTS: any conduit for hot air, gas, water, electrical wiring, etc.

Drip Mold
An exterior molding (extrusion or brake shape) contoured for controlling or deflecting dripping water.
Dry Glazing ...

Drip. Drip. Drip. Many people consider a leaky faucet a mere annoyance.

Drip A projecting construction member or groove below the member to throw off rainwater
Dry-wall Construction Interior wall covering with sheets of gypsum rather than traditional plaster.

Drip emitters like this are extremely efficient, delivering water directly to the base of the plant.

Drip Edge: A device designed to stop water running back under an overhang.

Drip Cap
A moulding to direct water away from a non-masonry-faced structure so as to prevent seepage under the exterior facing material.

Drip cap: A molding placed on the exterior top side of a door or window frame to cause water to drip beyond the outside of the frame.
Dry wall: Interior covering material, such as gypsum board or plywood, which is applied in large sheets or panels.

DRIP LOOP-A loop in each of the overhead electrical service entrance conductors designed to prevent the passage
of moisture into the weatherhead service raceway or equipment.
DUCTS-Metal piping used for distributing warm or cool air.

Drip cap
A molding or metal flashing placed on the exterior topside of a door or window frame to cause water to drip beyond the outside of the frame.
Drip Edge ...

A drip occurs when the faucet is turned off; a faucet leak occurs when the water is running. If you see water coming out around the handle, you have a faucet leak.

8. Drip irrigation: 'I hate wasting water, so I always install drip irrigation systems,' he says. Try: toro.com; rainbird.com.
Jamie Durie's The Outdoor Room: Interpreting the World in Your Own Backyard (Harper Design); amazon.com
Page 1 of 1 1 ...

The drip in a concrete wall can be cut to different shapes and the function of the drip is to prevent water from returning to the exterior face of the wall, so every window sill must have one.

The drip on the underside could be caused by a number of things.
1. hairline crack on the tank
2. mounting bolts starting to rot out
3. bad gasket between the tank and the bowl ...

a) a drip edge,
b) 18 inch-wide 30-pound felt at the eaves, and
c) a 36 inch-wide 30-pound felt underlayment.
Cut 2-1/2-inch-wide panel starter strips, applying them so that they overlap the eaves by 1 inch and the rakes by 2 inches (Fig. 1).

The drain/drip tube must extend to within 6" to 12" of a flush type floor drain. With bowl type floor drains the drain/drip tube can over hang the side of the floor drain.

Bending a drip edge is a good project to demonstrate how to use a brake. A drip edge requires several different kinds of bends, from a slight kickout to a full fold.

WaterWiser Drip Calculator
American Water Works Association
Financing & Incentives
Find Federal Tax Credits for Energy Efficiency
Energy Savers ...

Don't be a drip - join the faucet society and splash out on a new tap
More bathroom shopping
Comment… ...

Inside the drip-edge of the roof skin is another small metal cable. Wall insulation and wall skin simply clip to it and hang down, as if from a clothes line.

Drip, drip, drip..Having plumbing problems? Or, maybe you need some plumbing help. From repairing kitchen faucets to toilet repair and from plumbing tools to everything including the kitchen sink, Repair-Home makes do it yourself plumbing easy.

The simplest drip-irrigation setup uses flexible ½-in. poly tubing. It installs easily, it's inexpensive and it can easily be repaired if damaged. Drip emitters spaced evenly at 12-in. intervals send water to the plants' roots throughout the bed.

Installing new drip pans for burner top areas occasionally will save you from hours of scrubbing, but in between not letting them get really bad is best.

Related Searches drip irrigation systems greek word xeros drought resistance native plant species lawns and gardens solar orientation
Explore Home Renovations
Must Reads ...

Drip The projecting part of a cornice which sheds rain water. Dry Wall A wall surface of plasterboard or material other than plaster. Eaves The extension of roof beyond house walls.

Drip - Moulding or groove in overhanging member to prevent water creeping back
Eaves - Overhang of roof beyond wall below
Efflorescence - Unsightly powdery white salts brought to surface of brickwork ...

Dirty refrigerator drip pans
Laundry room with unvented dryer
Unventilated attic
Carpet on damp basement floor
Bedding
Closet on outside wall
Dirty heating/air conditioning system
Dogs or cats ...

I also installed a white aluminum drip cap across the top piece of trim and let it slightly overlap on the ends of the trim, ...

See also: Home, Water, House, Light, Room