Noncombustible Construction
A factor applied to factored loads, other than dead load, to take into account the consequence of collapse as related to the use and occupancy of the structure, as in Limit States Design.
Return to Top of Page ...
noncombustible (incombustible, adj.) See combustible and noncombustible materials.
Noncombustible - The material will not burn. The glass fibers in PINK fiber glass insulation have a natural fire resistance, and are considered non-combustible when tested in accordance to ASTM E136.
Noncombustible Material:
materials that pass the test procedure for defining non-combustibility of elementary materials as set forth in ASTM E 136.
Noncombustible Material
A material that, in the form in which it is used and under the conditions anticipated, does not ignite, burn, support combustion, or release flammable vapors when subjected to fire or heat.
O ...
Noncombustible
Definition excerpted from the ICBO Uniform Building Code: 1. Material of which no part will ignite and burn when subjected to fire. 2.
Noncombustible The material will not burn.
Normal Slope Application Method of installing asphalt shingles on roof slopes between 4 inches and 21 inches per foot.
Noncombustible
Any material which will neither ignite nor actively support combustion in air at a temperature of 1200° F. when exposed to fire.
Noncondensable Gas ...
Noncombustible
A material that will not contribute fuel or heat to support a fire to which it is exposed.
Nonflammable
A material that will release very little heat when exposed to fire or flame.
A noncombustible horizontal surface in front of a fireplace; the hearth may be flush with the surrounding floor or raised above it.
Heartwood ...
Use noncombustible siding. I've seen vinyl siding melt and flow down the sidewalk as it was burning. Use protective shutters for your windows, or perhaps noncombustible drapes.
Blocking or noncombustible material between wall studs to prevent vertical draft and flamespread. Same as Fire Blocking.
Fish tape
Flexible metal strip used to draw wires and cable through walls, raceways, and conduit.
Chimney-A vertical masonry shaft of reinforced concrete or other approved noncombustible, heat resisting material enclosing one or more flues. It removes the products of combustion from solid, liquid or gaseous fuel.
Fiberglass insulation is noncombustible and doesn't retain moisture. Fiberglass insulation is a cost-effective, energy-saving product that improves energy efficiency and reduces the fossil fuel combustion necessary to heat and cool a building.
Gutters and Leaders: Gutters and leaders should be of noncombustible materials. They should be securely fastened to the structure and spill into a storm sewer if the neighborhood is so provided.
Manufactured masonry unit: A man-made noncombustible building product intended to be laid by hand and joined by mortar, grout or other methods.
Masonry: An assemblage of masonry units, joined with mortar, grout or other accepted methods.
1. Lay it all out. In this case, on a flat, noncombustible surface--the shop floor. Now square up the pieces of the frame and lightly tack-weld them together. Some clamps or weights will hold everything in place.
This stuff is noncombustible, won't rot or crack, is termite-proof, and is stable through temperatures and humidity changes. It can be painted or stained, and the trim can last up to 50 years (paint jobs should last 15+ years).
Several types of vent materials, including flexible plastic that is generally the easiest to install, will do the job but noncombustible metal duct is best for fire protection and required by most building codes.
It also has different class ratings which is important where local fire codes matter. For instance, Class A shingles are made of noncombustible glass fibers which make them fire-resistant.
Type X wallboard, which is typically required to achieve fire resistance ratings, is formulated by adding noncombustible fibers to the gypsum.
It's permanent and noncombustible. When insulating crawlspace walls, though, it's just as important to lay down polyethylene sheeting on the ground to create a vapor barrier that will prevent moisture damage to your floor.
It also has applications in the areas around fireplaces and wood burning stoves. The product is noncombustible and it will not swell, soften, decay, delaminate or disintegrate according to the manufacturer.
 See also: Floor, Water, Design, Building, Construction
  
|
RSS
