ETCHING:
To remove part of a surface by acid for a decorative effect. Usually etching is done on a precious metal like silver or gold.
Custom Jewelry ...
Laser etching inclusions are surface blemishes and imperfections that are created when careless or inadvertent markings or inscriptions are made while laser etching, marking, or inscribing the external surface of a cut diamond.
Etching non ferrous metals
This [etching metals] is usually a dangerous and toxic task, but it can be made safer and easier.
Etching
Removal of part of a metal surface by acid for a decorative effect
Etui
Small cylindrical case that hangs from a chatelaine ...
Etching - In the mechanical process, a design is masked off from the rest of the crystal or glass item. The piece is then "sandblasted" (acid is applied), resulting in the finished design.
Etching: See "Metal Etching."
Eternity ring: Band set with full or half circlet of stones given by a husband or wife as a pledge of undying love. Similar styles include: guard, caliber and insert rings.
Etching -A process which creates a design on metal or glass by using an acid. .
etching - The chemical removal of metal usually with an acid or a chloride.
Stretching Tapers
Stretching Tapered Insertion Pins are used to stretch piercings up one size at a time. At one end of the tapered insertion pin is a small groove slightly larger than the size of the intended jewellery.
Acid Etching
This process involves engrossing the metal in an acid solution while protecting certain parts with a substance like wax or rosin, which is known as resist, in order to create a pattern on the metal's surface.
Acid Test ...
Etching slices of meteorites with nitric acid allow patterns known as Widmanstatten lines to be more visible. These lines and patterns are the result of the meteorite cooling in outer space over billions of years.
...
Etching
Corroding and removing metal by using acid, other areas are protected with covering agent. This mater is used for decorative work.
etching
The controlled corrosion of a metal surface with resists and acids to create a texture or pattern ...
Etching
Etching is the process of creating a pattern or design on metal, and is achieved either by using harsh chemicals to eat into the surface, or by cutting into the surface using a sharp tool.
Etching with acid was a cheaper technique, which gave much the same effect as engraving. This involved creating a pattern in a protective overlay, then applying add which ate into the surface of the unprotected glass.
COLLECTOR'S NOTES ...
Etching: A process for producing designs on metal by using acid, the design is scratched through a coating of wax or varnish on the article, exposing the surfaces of the metal, and acid is applied to eat into the metal to form the design in etching.
ETCHING A process similar to engraving in which acid is used to etch a design into the surface of metal, glass or gemstones. Wax is often used to protect areas that are not intended to be etched.
ETERNITY RING ...
Etching is the process that employs various aqueous solutions, lasers, and specialized carving tools to produce designs or patterns in the surface of gemstones and other objects. Etching is not as deep or distinct as engraving.
Stretching over 60 miles in length, with several hundred miles of indented coastline,
its beauty is derived from its geology. The Quirang, The Old Man of Storr and Kilt Rock
are among some of the geologically-derived, scenic highlights.
rapid etching/dissolution in HCL, HNO3, and ammonia
Thermal Traits
avoid thermal shock ...
This includes such techniques as sandblasting, faceting, polishing, as well acid etching the finished piece to leave a matte sea glass like finish.
Stretching: increasing the size of piercing to wear larger gauged jewelry
Stud: a piece of jewelry that is not a ring. For example, a labret stud, a gun stud, a nostril screw or a nose bone.
Renaissance: Stretching from the 15th to 17th centuries, this European period experienced rapid advancements in the Arts and Sciences.
By using a photo-etching technique, we can turn your artwork
or almost any image into beautiful custom made jewelry.
Please send us an inquiry with a picture of your design! ...
You can view these etchings under a Microscope or Jeweler's Loupe and compare the Inscription to the Report Number on your Certificate. They should always match! ...
Florentine Finish:A type of metal finish achieved by etching or engraving parallel lines into the metal's surface in order to reduce shine.
Engine-turning Decorated metal surface made by moving the surface of the object against the blade Engraving A technique in which metal is cut away with a tool known as a "graver" to form a design, done by either hand or machine Etching ...
regional metamorphism Metamorphism that affects rocks over vast geographic areas stretching for thousands of square kilometers.
If you are etching carbonates/calcite off a specimen then you should check it after five minutes. Be careful not to inhale any fumes when checking the progress. When removing calcite or marble from specimens the action is very fast and active.
Etching: A metal decorating technique that utilizes acids to burn a design into the metal surface. An acid resistant substance such as wax or varnish coats the surface to be untreated. As acid corrodes the exposed areas, a design emerges.
This is done through gravers, chisels or etching and resembles the glyptographic technique in which intaglios are made (only at a lower relief).
"Let me see," I said, stretching out my hand, more desirous of bringing this beauty closer to me than of examining it with an expert's jaundiced eye.
We hope you now understand that by simply stretching or compressing the vertical axis of the axial cross we had used previously in the isometric system, we defined the tetragonal system.
A comfort fit band with just neat etchings around the rim makes a stylish band which will weather all storms or the satin finish band circular and slightly flat with oblong indentations or the wave pattern enhanced by a gold plated finish.
Micro-etched Crystal - In 2002, Rolex began micro-etching the Rolex "coronet" or "crown" right below the 6 o'clock marker.
They are of help when sketching an identity diagram, make it easier for the grader to hold the stone in the same position when marking the Inclusions.
With a rich history stretching back some 5,000 years, like gold, silver occupies a hallowed place in our collective history.
Engraving is the process of etching a design, initials, family crest or anything else into the surface of metal. The traditional method of hand engraving is becoming less common as it is replaced by sophisticated computerized techniques.
Under special treatment (stretching of organic fibers and carbonization) it is possible to arrange the carbon planes in direction of the fiber. Perpendicular to the fiber axis there is no orientation of the carbon planes.
Moss Agate: Nature's Etchings
To me this is an especially lovely, under-appreciated crystal. In appearance it's milky agate with dark green mossy patterns, a combination that generates a gentle, nurturing energy.
Engrave
Engrave is an etching technique where a design is impressed with a tool, it is the opposite of emboss.
Eternity Ring
Eternity Ring is a ring that has a row of gemstones.
Stardust - Stardust is a type of metal finishing effect created by etching a surface with a laser. The laser treatment roughs up the surface and causes it to catch light in a different way than smooth polished metal.
Choosing a Bracelet Mandrel
A bracelet mandrel makes shaping and stretching bracelets a breeze.
Jewelers File
A jewelers file is one of those small tools you need to carry with you to every craft show.
Good quality flat copper used to make printing plates by selective etching or engraving. The term is also applied to the immaculate type of flowing handwriting typical of that used on copper.
Copper plating ...
Lines and patterns are the result of cooling in outer space over billions of years and etching slices with dilute nitric acid allow these patterns known as "Widmanstatten lines" to be more visible.
Decorated by cutting or etching a design into the metal.
F
faux ...
A personal touch to the gift always makes it more attractive. It is easy enough to choose something and wrap it nicely. But etching of names or dates makes the gift special. Not all gifts may yield themselves to this, so exercise discretion.
Engraving: The process of decorating metal by etching a design into its surface ...
Florentine - An etched metal finish, similar to satin but with a noticeably deeper etching in the gold.
Polished - Most popular finish on gold, giving it a smooth finish and a bright shine.
Widmanstatten A crystalline pattern seen in iron meteorites after acid etching
Top ...
Rather the worry is that as pearls loosen on the strand due to stretching of the string (which is inevitable with wear), the knots become free twist and to abrade the nacre/bead junction, and damage the pearl.
Also called a stretcher earring, these earrings are used while stretching oneâÂÂs ear to a smaller gauge.
Tapered ...
" These get the honorary name mineraloid. Mineraloids are a small club of about eight members, and that's stretching things by including some organic substances (violating criterion 3 as well as 4). See them in the Mineraloids Gallery.
Always lay strands flat to dry to prevent the cord from stretching. To ensure years of enjoyment, be sure to have your pearl strands inspected regularly and restring as needed. Peridot - does not react well to heat.
 See also: Jewel, Stone, Rough, Gold, Make
  
|
RSS
