Shallow cut

Shallow Cut: Shallow Cut will let light lost through a diamond's bottom causing it to appear dull.

Shallow Cut: When a diamond is cut too shallow, it will lose or leak light through the side or bottom. This results in less brilliance and value.

Shallow Cut Diamonds
When the cut of a diamond is too shallow, light escapes through the pavilion before it can be reflected.
Deep Cut Diamonds ...

Shallow cut: A cut which will allow light to escape out the bottom of the diamond.
Shape: The style the diamond is cut in (ex: heart, radiant, emerald, round, etc.) ...

Shallow Cut
Cut refers to the angles and proportions a skilled craftsman creates in transforming a rough diamond into a finished diamond. When a diamond is cut too shallow, it will lose or leak light through the side or bottom.

The "Shallow Cut" and "Deep Cut" examples in Fig. 1 show how light that enters through the table of a Modern Round Brilliant diamond reaches the pavilion facets and then leaks out from the sides or bottom of the diamond rather than reflecting ...

French for shallow cut, enameling technique worked in a chased relief metal and overlaid with translucent enamel
Berlin Iron
Cast iron jewelry worked into delicate openwork patterns, and made in Berlin during the first half of the nineteenth century ...

Head ornament in the form of a narrow band worn low, encircling the forehead Bandelettes Decorated ribbons worn in the hair Bangle Non-flexible bracelet Baroque Irregular shaped stone or pearl Basse-taille French for 'shallow cut', ...

Basse-taille (French): Literally means shallow cut. The technique involves, first, establishing a design in metal, whether through carving, engraving, stamping or chasing. The surface is then covered with transparent enamel and fused by firing.

Beware of shallow cuts.
Ruby made by flame fusion or crystal pulling techniques is manufactured in enormous quantities and sells for a few dollars a carat. Flux-grown synthetic rubies manufactured by J.O.

Basse-taille translates from the French as "shallow cut." A design is made on metal by carving, engraving, stamping, engine-turning, or other method, then covered by translucent enamel.

In order to enhance the colour, the rough is often given a step cut whereas a shallow cut is preferred to lighten the tome. While cutting the stone, the entire concentration of the cutter remains on the trichroism of the stone.

round diamond has a shallow cut, sometimes called a "spread cut", it will be will look larger than a well-cut stone of the same weight because its diameter will be larger than 6.5mm.

A deep cut usually darkens the color whereas a shallow cut lightens it. Therefore a deep cut stone is not only color rich but easy to mount on jewelry.

Basse-taille - This is a French word that means "shallow cut." It refers to an enameling technique which has chased relief metal which is overlaid with a translucent enamel finish. Very popular with mid 20th century Scandinavian silversmiths.

Rubies may have a shallow cut that sacrifices brilliance if the rough material was on the dark side or the rough did not have sufficient depth.

Because they are so often ‘eye clean' with no visible inclusions, aquamarines are often cut in long, shallow cuts that allow the color to gather and refract properly. It's a cut that shows off the aquamarine's transparency and watery quality.

By 1880, glass cutters were using hydrochloric acid to remove large areas, and a copper wheel for more detailed work. After 1890, acid was used more frequently, leading to a flatter, more shallow cut.

'Cut' refers to the faceting of a diamond and is influenced by the shape of the rough diamond, location and amount of inclusions, and the final shape desired. A diamond faceted in the 'brilliant' style may be of either ideal cut, shallow cut, ...

trichroism of blue-violet, grey and near colorless into account in order to achieve an attractive "face up" color. Depending on the color of the rough material a stone might be step cut to deepen or enhance color, or windowed and/or shallow cut to ...

See also: Cut, Color, Stone, Jewel, Diamond