Precious Metal Properties
Pros and Cons of White Metals
Wear and Tear of Metal
Nickel Allergy ...
White metal makes slightly yellow or brown stones look duller (usually unpleasant), but on the other hand enhances the color of blue stones. Icy winter whites (D-J) look stunning in white gold or platinum.
B2C Jewels' Ideal Color Grade ...
White Metal Alloys with heavy tin or lead content, such as pewter. Also called Britannia metal or tin plate. One of the most commonly used metals in costume jewelry.
Buy Your Rosary and PrayerBeads ...
A silvertone alloy of tin, cadmium, lead and zinc, also known as base metal or pot metal.
white metal - A mixture of tin, antimony and copper in varying proportions. Sometimes used as a base for inexpensive electroplated jewelry.
white metal - a metal that is a mixture of tin, antimony, and copper in various proportions. It is sometimes used as a base for expensive electroplated jewelry.
White metal, also known as pot metal, is a mixture of alloys which do not
contain any precious metal.
Match Not Found ...
White Metal- a metal which has no gold, silver or platinum in it, and has a white finish. Often called Pot metal.
White Metal - Any combination of alloys of nonprecious metals such as lead and tin. Also called "Pot Metal".
Zinc - An abundant, lustrous, bluish-white, metallic element of the magnesium-cadmium group; brittle at room temperature but malleable when heated. Used to form a wide variety of alloys.
A white metal mixture of copper, zince, and nickler which contains no silver.
A white metallic element of the platinum group that is harder, whiter, and more reflective than platinum. It is widely used for plating.
Refers to tiny flashes of light when the diamond, the light source, or the observer moves. Most often seen in the diamond's stunning sparkle.
A white metallic element, used in dentistry, jewelry, and chemical and electrical equipment. Used to make white gold, without causing the stress corrosion that can happen in nickel alloys.
Pavé setting ...
Tip 1: White metal, white gold and silver are the best metals for aquamarine, as they enhance the color of the stone, and don't contrast it like gold would.
Not all white metals are equal. Did you know that white gold is an alloy created using yellow gold? To keep its white color white gold will usually need to be re-plated, whereas platinum is naturally white and will never fade or tarnish.
A soft, white metallic element used in the manufacture of jewelry, silverware, coins and many branches of science, usually alloyed to harden it for use in jewelry and tableware
Single cut ...
A silver white metal that is lightweight and malleable
An opaque form of feldspar ...
By adding white metals such as nickel, zinc or palladium to yellow gold, the deep yellow of pure gold begins to whiten. To enhance the whiteness, almost all white gold is rhodium plated. Rhodium is an extremely hard white metal used to make your white gold jewelry look brand new.
Silver is a white metallic element, harder than gold, softer than copper and second only to gold in malleability and ductility. Represented on the Periodic Table of the Elements by the symbol Ag, silver is an excellent conductor of heat and electricity.
Silver is a white metal which holds both the highest electrical and thermal conductivity out of all metals. Silver is generally produced as a by-product of the refining of gold, lead, copper and zinc.
Platinum: A white metallic element, the most important member of the platinum group; named platina, meaning 'silver of little value,' in 1735 by Spanish explorers of Colombia.
Platinum Group: The six metallic elements, platinum, palladium, iridium, osmium, rhodium and ruthenium.
A hard, silver-white metal used in alloys and plating. Nickel can be used as an alloying metal in sterling silver. Because about 5% of the population has an allergic skin reaction to the nickel, we use copper as the alloy in our sterling silver.
Troy OunceFrom the troy system of weight used for measuring precious metals, based on a pound of 12 ounces and an ounce of 20 pennyweights or 480 grains. Precious metals are measured in troy ounces worldwide. White Metal AlloyFor jewelers, white metal (babbit) alloy is tin and antimony.
If you prefer a white metal and are willing to be non-traditional, there is one more alternative.
What About Titanium?
Nickel is a white metal that looks like silver but can cause allergic reactions in some.
Jewelry Metals Glossary
Annealing - Multi-phased heat and stress treatment that alters the microstructure of a metal adding strength, pliability, and hardness.
Similar looking white metals like Sterling Silver or Stainless Steel: ...
AluminumAluminum is a lightweight, silver-white metal. When aluminum was first discovered in the 18th century, it was more valuable than gold. Now inexpensive, aluminum is used in many alloys. Some inexpensive jewelry was made using aluminum.
AluminumA lightweight, silver-white metal. AmazoniteAmazonite is an iridescent stone that ranges in color from green to blue-green. AmberA translucent fossilized tree resin (from conifers). American RubyAn American ruby is actually a pyrope garnet (and not a ruby at all).
of a feather or supporting a feather, worn in the hair or on a cap, popular in the middle of the eighteenth century and the early twentieth century A Jour Open setting that leaves the pavilion facets open to the light Alloy A mixture of two or more metals Aluminum A silver white metal ...
RhodiumA silvery-white metallic element that is a member of the platinum group. Rhodium is harder, whiter and more reflective than platinum, six times more costly than gold, and the only way to dissolve it is with sulfuric acid.
With the loss of base metal, jewelry designers turned to the most readily available white metal, sterling silver. During the war, the vast majority of costume jewelry was created in sterling and plated in either gold or rhodium, which simulated the look of platinum.
PLATINUM - A rare, white metal, known for its bright color and great durability. Platinum belongs to the platinum group of metals, or PGMs: platinum, iridium, palladium, ruthenium, rhodium, and osmium. Platinum is typically used in almost pure form (95% platinum, 5% other metals).
Palladium is a naturally silvery-white metal that is sometimes used in jewelry making as a precious metal substitute for white gold, which requires a rhodium plating to achieve its neutral color. Palladium can also be used instead of silver or nickel, to alloy white gold.
Lead has a dull luster and is a dense, ductile, very soft, highly malleable, bluish-white metal that has poor electrical conductivity. This true metal is highly resistant to corrosion. Because of this property, it is used to contain corrosive liquids (e.g. sulfuric acid).
White gold is an alloy of gold mixed with white metals such as silver, palladium, or nickel. Some jewellery made with white gold is coated with either rhodium or a palladium and platinum mixture, both of which are highly reflective and add lustre to the jewellery's surface.
Palladium: This white, platinum-group metal is quickly growing in popularity now that new alloys allow for quality casting while maintaining 95% purity, and many are predicting that it will replace white gold as the white metal choice for jewelry.
Nickel: A hard, bright, silver-white metallic element of the iron group that is malleable, ductile, and resistant to corrosion. Nickel is a most common allergen affecting users of fashion jewelry containing nickel. Some jewelry lines are now manufacturing nickel free jewelry.
The inclusion of white metals in the alloy give white gold its silvery color. White gold has a slightly yellowish tint that may be more noticeable depending on the percentage of gold in the metal. White gold is traditionally rhodium plated to give it a crisp, sparkling white appearance.
Chrome: A hard, brittle, grayish white metal, fusible with difficulty and resistant to corrosion. Its chief commercial importance is for its compounds, as potassium chromate, lead chromate, etc., which are brilliantly colored and are used dyeing and calico printing.
Silver is a fine, silver-white metal often used in jewelry. Pure silver has a hardness of 2.5. Other metals are alloyed with silver (usually copper) for silver used in jewelry making. Silver tarnishes after exposure to air (a thin layer of silver-oxide forms on the surface).
Chromium is a hard, shiny, gray-white metal. This metal resists corrosion very well and is used in costume jewelry as a coating over other metals.
Chrysoberyl is a hard stone that ranges in color from yellow, to brown, to green. Some chrysoberyls include alexandrite and cat's eye.
White Gold - Pure gold is alloyed with other white metals until the final white gold karat is reached. In the case of 18 karat white gold, palladium is used as the other alloy, and with 9 karat, silver is mostly used as the other alloy.
While white gold and platinum are both white metals that beautifully reflect light, there are some fundamental differences between the two. If you're leaning toward a white precious metal and are undecided between platinum and white gold, here are a few points that may help with your decision.
The Peeler had worn seven white metal buttons down the front of his swallowtail coat. In the centre of the button was a crown appropriate to the monarch, the design of which changed, like the helmet plates, with the new accession.
A silvery-white metal that is a member of the platinum metal group. It is similar to platinum is its appearance, malleability, and wear but it is much lighter in weight. Like platinum, palladium will not discolor or tarnish.
Nickel Silver (also called German Silver) is a white metal alloy of 70% Copper, 20% Zinc and 10% Nickel. It contains no Silver. Many people are allergic to Nickel and because of this, the use of Nickel Silver in jewelry has been outlawed in some countries.
Aluminum - A silver white metal that is lightweight and malleable
Amazonite - An opaque form of feldspar
Amber - The fossilized resin of prehistoric pine trees which ranges in color from golden to orange-red ...
White gold is alloyed with a large percentage of silver, or a selection of other white metals. The percentage of gold naturally varies, according to the amount of other metal used. White gold is highly reflective and not subject to tarnish. The ancient term for it was Electrum.
An alloy of gold which has a white metal like palladium added to it, turning it white. Most white gold is a grayish-yellow tinted white color and is plated with rhodium (a platinum family metal) to give it a bright white color.
First Name ...
White gold is actually yellow gold which has been combined with a white metal such as palladium or nickel to give it a white hue.
White Gold Characteristics
A combination of gold and palladium is very malleable and perfect for fashioning intricate white gold ring settings ...
Cobalt is a lustrous, magnetic, silvery-white metal with a blue tint that is rarely used in jewellery making. However, the term cobalt is commonly used to describe the deep, lustrous blue colour of beads made from other materials ...
Called the "King of Metals", platinum is a very heavy (nearly twice the weight of gold), silver-white metal that is very ductile. Although it is a soft metal, platinum is not easily scratched, never tarnishes, and is very strong and durable.
(Also called "Beryllium") A rare silver-white metallic element resembling magnesium. It is only found in nature combined with other elements, usually silica or alumina, in the minerals phenacite, chrysoberyl, beryl, euclase, and danalite.
A heavy, non-corrosive white metal with high tensile strength which dulls as it is worn but holds its detail for many years, giving it heirloom characteristics.
A non-corrosive silver white metal, which is heavy and has a high tensile strength.
The property of having more than two colors, especially when viewed from different angles. In pleochroic minerals, a single stone will show many colors.
Rhodium - A member of the platinum group, rhodium is a shiny white metal that is highly reflective, durable, and expensive. It is often used as a hardening agent for platinum. In jewelry, it is plated on other metals to increase luster and eliminate tarnishing.
Rhodium is a very hard, very white metal that provides a superior finish to many sterling pieces. Your piece will resist scratching and look new for years to come.
Rhodium is a shiny white metal, which is extremely hard and durable. Over time, with regular wear, the Rhodium plating may wear off revealing the yellow Gold underneath, and can be easily repaired by a jeweler who can redo the Rhodium plating.
Gold is a traditional, and popular choice for wedding jewelry. White Gold is an alloy of gold and some white metals such as silver and palladium.
White Gold is similar in characteristics to platinum and shares many of the same properties of platinum including its white color.
Palladium is a rare and lustrous silvery-white metal.
An intense neon blue-green color found in tourmalines mined in northeastern Brazil, due to traces of copper. A similar shade is also synthesized and applied to topaz.
Colored metals would include pure gold, most gold alloys, copper, and non-precious alloys such as brass or bronze. The category of white metals includes pure silver, silver alloys, white golds, platinum, platinum group metals and their alloys; white non-precious metals such as tin, ...
A darker blue sapphire set in white metal always brings out this gemstone's life. When faceted, sapphires are considered very lively and full of fire. This stone can be cleaned with gem cleaner to maintain its brilliance. Learn more>>> ...
However, we all know how popular this white metal has become. ItÂ's a favorite now for wedding bands and engagement rings. ItÂ's a status symbol for music industry celebrities. But it is also very, very expensive. Lots of jewelry lovers want it but few can afford it.
A composite of cheap metals used for casting costume jewelry. Pot metal is also called white metal and is generally brittle, like metals used in a toy cap gun.
Prayer box ...
Rhodium is a shiny, white metal, which is extremely hard and durable. However, over time the rhodium plating may wear away, revealing the slightly yellowish tint of the underlying metal. To keep white gold looking its best, it may require rhodium re-plating every 1 - 2 years, depending on wear.
Silver is a beautiful choice as well. More affordable than gold and platinum, silver has been extremely popular lately with the recent trend toward white metals. Silver is not typically used for necklaces which contain expensive gemstones.
Buying tips: ...
In approximately 100 BC the Indians in Pre-Columbian South American cultures succeeded in working platinum and gold together. In 1590 Spanish Conquistadors discovered the white metal in the rivers of Ecuador. In 1824 Substantial deposits of platinum are discovered in the Ural Mountains in Russia.
silver - a white metal - but oxidation is less noticeable with most gold jewelry because
it just seems to be a darker shade of reddish - gold. The copper is used to make
these metals harder; pure 24K gold and .999 fine silver are very soft.
Platinum is the strongest and rarest of the precious metals used in making jewelry. Platinum does not tarnish and through wear develops a beautiful white metal luster making it a perfect choice for jewelry.
For those who like the look of platinum but can't afford it, there is always white gold. White gold, which is pure gold that has been mixed with nickel, zinc, silver or other white metals, costs considerably less than platinum, but is also less durable.
Another factor that affects a diamonds's apparent color is the color of the mounting itself. Yellow gold makes slight amounts of yellow in a diamond less obvious, while white metal mountings make the color in yellow diamonds more apparent.
White gold is highly reflective and does not tarnish so it is common to add a layer of plating called "rhodium" plating that will protect the reflective quality of the white metal. This does not detract from the value of the metal.
This pastel blue gem is a designer favorite since it is affordable and available in a wide range of gem shapes and sizes. Its bright and lively color looks right set in both yellow and white metals.
Prices decrease with this grade, but the gems are still a good choice, so a J diamond could be just right for your needs. Consider a setting created from a white metal, either gold or platinum, to help offset any yellowish shades that might be present in a J grade diamond.
This leaves it to you for observation. What are her tastes in jewelry? Is she the kinds who would rather have a simpler, understated ring, or would more sparkle win her? Is she more inclined to a particular gemstone? Would she prefer white metal or yellow? Look at the jewelry she currently wears.
R.P. = Rolled Gold or Silver Plate
E.P. = Gold or Silver Electroplate
G.F. = Gold Filled (usually preceded by numeral; i.e., 14K G.F. or 10K G.F.)
N.S. = Nickel Silver
G.S. = German Silver
B.M. = Britannia Metal
W.M. = White Metal
G.E.P. = Gold Electro-Plate ...
Decorative watch chains were worn in a waistcoat, vest or trouser pocket and were a popular fashion of gent's jewelry from the 1800s through the early 1900s. White Gold: A gold alloy consisting of a mixture of silver or zinc with gold. The white metal, in effect, bleaches the gold.
To create white gold, yellow gold is alloyed with nickel and zinc (and small amounts of copper and silver), thereby achieving a white metal look. Platinum has purity, strength, rarity, durability, and a natural rich, white color.
platinum A rare malleable, strong, and non-corroding white metal that is commonly used in settings for diamonds after the mid-nineteenth century. plique-a-jour An enamel technique in which a design is outlined in metal and filled in with various colors of transparent enamel.
See also: What is the meaning of Metal, Jewel, Jewelry, Color, Diamond?