LACKAWANNA TERMINAL
One of the oldest railroad terminal's in use today, Lackawanna Terminal in Hoboken, NJ, is now the starting point for New Jersey Transit. The station has been undergoing restoration.
TERMINAL LOAD"A shipment of mail consigned to a certain R.P.O. terminal office for sorting and reshipment in other sacks
THE BISCUITS HANG HIGH"There's a scarcity of food handouts in that locality ...
RESET Terminal - Currents And Voltages
The next diagram gives the current from and the voltage at the RESET terminals of five 555 timer chips from different manufacturers.
Terminal blocks/boards can be purchased at most hobby shops, electronic stores such as Radio Shack or at auto parts stores.
Terminal railroad
A railroad whose business is not point-to-point transportation but rather pickup and delivery service for a connecting line-haul railroad. Switching and terminal companies usually receive a flat per-car amount for their services.
Terminal Dwell Time
Average hours a car is at the specified terminal location expressed in hours.
Terminal
Principal point of origination or termination of trains for one or more railroads; generally located in or near major cities. Includes any station structure, turnouts, towers, associated buildings, and other equipment.
Third Rail ...
Terminal
Facilities provided by a railroad at a terminus or at any intermediate point on its line for the handling of passengers or freight, and for the breaking up, making up, forwarding and servicing trains, and interchanging with other carriers.
The Terminal is served by 14 freight elevators and is designed to facilitate the speedy and economical handling of freight.
This terminal, with operation promise, fits on six feet of shelf just eleven inches wide if you model in HO. For narrow gaugers or folks enjoying N or TT, even less shelf will do the job.
Louis' Terminal Railroad Association (TRRA) has operated the tracks along the Riverfront since they were first laid in 1885.
Dudley Street Terminal Station, Roxbury, Massachusetts
Train Layout Design ...
Also called a terminal railroad. These railroads move freight in a limited area between shippers and a terminal where freight is transferred to long haul railroads.
Swizzle Valve ...
Union station or union terminal (US), joint station (UK): a railway station (q.v.) at which tracks and facilities are shared by two or more railway companies.
To test the horn use a couple of jumper wires to connect the battery terminals directly to the horn leads (one is a common ground with the locomotive's frame ground). If it operates, the wiring is at fault.
Pocket Portion of track within a terminal on which a train may stand for a period of time Pomptrolli South-African: a hand-operated pump-action inspection cart.
ADA (Americans with Disabilities Act) A 1990 Federal law that mandates specific requirements for vehicles and facilities, such as stations and terminals to accommodate the disabled.
Single Track System - Consists of a single track between two terminals.
Six-Footway - Area between parallel railway tracks.
Skew - Bridge spans obliquely and is therefore longer than the square gap.
Terminal station (esp. U.S.), terminus (esp. UK): A station sited where a railway line or service ends or terminates.
The T (US): A nickname for Massachusetts Bay Transportation Authority (MBTA) the Subway service through Boston, Massachusetts.
Of course, this three trip maneuver and interchange necessitated an additional mechanical inspection and initial terminal air brake test at Norton.
As a result, Conrail was restructured into a switching and terminal railroad.
Consist
RAILWAYS. A train, usually without a locomotive. Any coupled set of carriages (passenger cars) and/or wagons (trucks, freight cars).
Nearly all new train sets have terminal joiners for you to put the wires up to. No matter what system you have, you still will connect 2 wires to the tracks (even on three rail Lionel- the engine picks up power from a roller on the middle track).
Connect the two AC terminals of your power supply to the input terminals of the 51750. Run a pair of wires from the first set of output terminals on the 51750 to the 12010 switch drive.
The wires must be soldered to the tag strip.
Terminal Block : A means of joining two wires with screw terminals, useful to avoid soldering.
Turnouts : Another word for track points and the one most commonly used by modellers.
You'll notice that we're using the DC terminals. Some believe that the lights won't last as long with DC as with AC. What you can do to prolong the life is to switch the polarity from time to time using the reversing switch.
A revolving bridge commonly used to turn locomotives in an engine terminal.
SEARCH THIS SITE
This icon denotes premium subscriber content. Learn more " ...
 See also: Track, Train, Switch, Operation, Current
|
